Model NO.: T5518
Trademark: Chinasky
Origin: China
HS Code: 820320
Model NO.: T5518
Trademark: Chinasky
Origin: China
HS Code: 820320
CCTV  Compression Tool for BNC / F / RCA Connectors (T5518)
 
Description:
The compression tool T5518 is for compressing waterproof connectors(BNC/F/RCA). It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.
Features:
Tool Compressed Distance
Before(±0.2) After(±0.2)
Min. Max. Min. Max.
27.5 54.8 19.5 46.8
 
Instructions:
Step 1:
1) Trim back the outer jacket approximately 1/2"
2) Trim the braided wire to approximately 1/4" length and fold it back over the outer jacket
3) Remove approximately 1/4" from the dielectric. This should leave approximately 1/4" of center conductor exposed and 1/4" of the dielectric exposed. Please review the diagram as shown.
Step 2:
Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.
Step 3:
Place the connector with cable into the tool's holder.
Step 4:
Squeeze the handles.
Step 5:
Remove the compressed connector from the tool.
 
For example, it can be used for our connector model No.CT5083/RG59, CT5081, CT5082
 
Size: 125*58*20mm(L*W*H)
Net Weight: 256g(280g including blister packing)

CCTV Compression Tool for BNC / F / RCA Connectors (T5518)
  CCTV  Compression Tool for BNC / F / RCA Connectors (T5518)
 
Description:
The compression tool T5518 is for compressing waterproof connectors(BNC/F/RCA). It connects radial connectors to coaxial cable. And it customizes the length of cable used to connect components.
Features:
Tool Compressed Distance
Before(±0.2) After(±0.2)
Min. Max. Min. Max.
27.5 54.8 19.5 46.8
 
Instructions:
Step 1:
1) Trim back the outer jacket approximately 1/2"
2) Trim the braided wire to approximately 1/4" length and fold it back over the outer jacket
3) Remove approximately 1/4" from the dielectric. This should leave approximately 1/4" of center conductor exposed and 1/4" of the dielectric exposed. Please review the diagram as shown.
Step 2:
Insert the stripped cable into the connector. Push until dielectric rests against the bottom of the relating ring inside the connector.
Step 3:
Place the connector with cable into the tool's holder.
Step 4:
Squeeze the handles.
Step 5:
Remove the compressed connector from the tool.
 
For example, it can be used for our connector model No.CT5083/RG59, CT5081, CT5082
 
Size: 125*58*20mm(L*W*H)
Net Weight: 256g(280g including blister packing)

CCTV Compression Tool for BNC / F / RCA Connectors (T5518)
 

Customized Stand

Poster Stand,Customized Stand,Poster Display Rack,Poster Board Stand

MGX Metalworks Co., Ltd. , https://www.mgxmetal.com